Products
-
PS-vlfm 30kv-80kv 0.1Hz ultra low frequency voltage generator
If the frequency can’t meet the requirement of rising pressure, it will definitely damage the instrument ! ! !
When doing the cable withstand voltage test, it is necessary to physically separate the core wire and the insulation layer, and do not cover it with other objects, otherwise it will cause high voltage discharge and damage the equipment ! ! !Model No.: PS-vlfm
-
PS-1001 Push Electrical bdv tester oil analysis equipment insulating oil dielectric strength tester
Insulating oil dielectric strength tester complies with astm d1816 astm d877 standard. It is testing all kinds of Insulation Oil’s Dielectric Strength Value.Our company has three different types of single-cup oil bdv tester, three-cup oil bdv tester and six-cup oil bdv tester.
Model No.: PS-1001
-
PS-1001B Push Electrical Oil BDV Insulation Oil Breakdown Voltage Dielectric Strength Tester
PS-1001B Double-opening cover design, strong sealing, not easy to be affected by the outside world, suitable for outdoor testing, three-dimensional shape is convenient to carry, transport and store, follow astm d1816, astm d877, obtained CE certificate, intuitive reading, simple operation
Model No.: PS-1001B
-
PS-BB500A Cheap ttr Transformer Turns Ratio Tester easy to use Transformer Tester
transformer ratio tester uses 32-bit ARM core as the processing core to control the whole machine. Turn ratio measurement of single-phase or three-phase transformers at one time. The instrument operation adopts English menu display, which is simple and intuitive. The test results are accurate and reliable, and the test results can be stored and printed. Strong anti-interference ability. It can meet the transformation ratio test needs of various large, medium and small transformers.
Model No.: PS-BB500A
-
Transformer Short circuit impedance tester
The short-circuit impedance is an important parameter of the transformer, and the short-circuit impedance method is the traditional method for judging winding deformation. According to GB1094.5-2003 and IEC60076-5:2000, the variation of short-circuit reactance is the only criterion for judging whether the transformer winding is deformed.
The low-voltage short-circuit impedance test is the most direct method to check whether the winding is deformed after the transformer is impacted by short-circuit current during operation, or after the transformer is impacted by mechanical force during transportation and installation. It is important for judging whether the transformer can be put into operation. It is also one of the basis for judging whether the transformer requires disassembly inspection.Model No.: PS-ZK03
-
80kv 60kv 30kv high voltage ac hv vlf hipot tester
Ultra low frequency and high voltage generator is a core product independently developed by using the latest technology in the United States. It adopts 7-inch touch screen, the latest ARM7 single chip microcomputer, high-speed AD acquisition circuit and background management software. It has the characteristics of low noise, energy saving, sine wave high-voltage waveform, high-voltage electronic switch polarity and so on.
Model No.: PS-vlfz
-
PUSH electrical Automatic insulation Three Cup Oleic Acid Tester
The transformer oil acidity tester adopts the extraction method, which can accurately detect the acid value of the insulating oil. It is a fully automatic measuring instrument. It takes single-chip microcomputer as the core and integrates multi-disciplinary technologies such as optics, mechanics, electricity, and chemistry. While the instrument improves efficiency and detection accuracy, it also reduces the operator’s contact with samples and reagents, making it safer
Model No.: PS2003
-
Transformer Automatic insulation Six Cup Oleic Acid Tester
The transformer oil acidity tester adopts the extraction method, which can accurately detect the acid value of the insulating oil. It is a fully automatic measuring instrument. It takes single-chip microcomputer as the core and integrates multi-disciplinary technologies such as optics, mechanics, electricity, and chemistry. While the instrument improves efficiency and detection accuracy, it also reduces the operator’s contact with samples and reagents, making it safer
Model No.: PS-2006
-
hydrogen generator |Gas Chromatography Test Kit
PS-300 High Purity Hydrogen Generator employs the latest technology to satisfy various models of gas chromatographs, which are manufactured by domestic and aboard manufactures.
Its pressure control adopts high sensitive fuzzy control and automatic tracking system to make the precision range of the pressure stability less 0.001MPa. It not only makes stable hydrogen pressure and flow, but also extends the lifetime of the instrument.
Its electrolytic cell utilizes transient metal element catalytic technology and process multi-stage purification. There are two filters providing with the instrument. The hydrogen purity can be reached up to: oxygen content : less 3PPM, water content dew point temperature :-56℃.
Model No.: PS-300
-
Air generator | Gas Chromatography Test Kit
PS-2009 Fully Automatic Air Supply is specially used to gas chromatograph as a stable pressure and purified air supply and satisfied with various models if gas chromatographs，which are manufactured by domestic and aboard manufactures .
It has been approved by National Analytical Instrument Testing Center.Model No.: PS-2009
-
ps-zj002 determination of oil sludge Petroleum Products Mechanical Impurity Tester
Built-in oil-free maintenance-free vacuum pump, metal bath thermostatic funnel, one instrument host completes all functions, no external vacuum pump and water bath, energy saving and environmental protection.
Model No.: PS-ZJ002
-
PS-BB102 Three-phase transformer turns ratio tester
Z-Join Transformer Test.
With blind test ratio, group test, tap position test and other functions.
AC/DC power supply modes are adopted, and it can be used with or without mains power on site.
Small size, light weight, easy to carry.
High and low voltage reverse connection protection.
Transformer short-circuit and turn-to-turn short-circuit protection.Model No.: PS-BB102
-
High Voltage Insulation Resistance Tester
• Microprocessor controlled high voltage insulation resistance tester with diagnostics.
• Suitable for analyzing insulation properties of cables, transformers, motors, generators, high voltage switches, insulators, wiring devices, etc.
• 6 ranges: 500V, 1000V, 2500V, 5000V, 10000V, 12000V
The voltage setting can be adjusted in each range
• Large LCD display with backlight and bar graph showing changes in insulation resistance and leakage current values.
• 2 power modes of AC power supply and rechargeable battery.
• Automatic discharge and voltage output warning function.
• The memory can store up to 43,000 data.
• Waterproof and dustproof IP64 -
Three cup insulating oil dielectric strength tester
The three-cup insulating oil dielectric strength tester is used to test the dielectric strength value of various insulating oils. Comply with astm d1816 astm d877 standard. It can test six kinds of oil samples at the same time, which is convenient and quick, and the results are accurate. Three kinds of electrode heads can be selected, flat electrode, spherical electrode and hemispherical electrode, to meet your various needs.
Model No.: PS-1003
-
Six cup insulating oil dielectric strength tester
The three-cup insulating oil dielectric strength tester is used to test the dielectric strength value of various insulating oils. Comply with astm d1816 astm d877 standard. It can test six kinds of oil samples at the same time, which is convenient and quick, and the results are accurate. Three kinds of electrode heads can be selected, flat electrode, spherical electrode and hemispherical electrode, to meet your various needs.
Model No.: PS-1006
-
PUSH electrical Capacitance Inductance Tester
This instrument is designed for the problems existing in the measurement of high-voltage shunt capacitor banks in substations, and refers to GB3983.2-1989 “High-voltage shunt capacitors”, DL/T840-2003 “Technical conditions for the use of high-voltage shunt capacitors” and JB5346-1998 ” It is specially developed according to national standards such as “Series Reactors”, mainly for the measurement of high-voltage parallel capacitor banks and reactors of reactive power compensation devices.
Model No.: PS-RG03
-
PS-BB500A Transformer Turns Ratio Tester Transformer Ttr Tester
transformer ratio tester uses 32-bit ARM core as the processing core to control the whole machine. Turn ratio measurement of single-phase or three-phase transformers at one time. The instrument operation adopts English menu display, which is simple and intuitive. The test results are accurate and reliable, and the test results can be stored and printed. Strong anti-interference ability. It can meet the transformation ratio test needs of various large, medium and small transformers.
Model No.: PS-BB500A
-
80kv 60kv 30kv vlf hipot tester Ultra low frequency tester high voltage ac hv vlf
Ultra low frequency and high voltage generator is a core product independently developed by using the latest technology in the United States. It adopts 7-inch touch screen, the latest ARM7 single chip microcomputer, high-speed AD acquisition circuit and background management software. It has the characteristics of low noise, energy saving, sine wave high-voltage waveform, high-voltage electronic switch polarity and so on.
Model No.: PS-vlfz
-
PS-ZG PUSH 120KV HV hipot electrical tester DC High Voltage Generator
Dc high voltage generator adopts high frequency pulse width modulation (PWM) technology to make closed adjustment with high voltage stability, small ripple factor and fast reliable protection circuit. The wide temperature LCD screen adopts green back light, which enables clear display either in bright light or in darkness. High-pressure components use Dupont new filling material, making the product more stable and reliable. Products are widely used in electricity power supply departments, power transmission and transformation engineering company and preventive test of large industrial enterprises and scientific research institutes as regulated dc high voltage power supply.
Model No.: PS-ZG
-
PUSH Eletrical dielectric oil tester oil breakdown voltage testing equipment
Insulating oil dielectric strength tester complies with astm d1816 astm d877 standard. It is testing all kinds of Insulation Oil’s Dielectric Strength Value.Our company has three different types of single-cup oil bdv tester, three-cup oil bdv tester and six-cup oil bdv tester.
Model No.: PS-1001D
-
PS-YC115 Transformer On-load tap-changer tester
The on-load tap-changer is the only moving part connected to the transformer circuit, so the detection of the on-load tap-changer is getting more and more attention. The instrument is mainly used to measure the transition waveform, transition time, transition resistance value at each moment, and three-phase synchronization of the transformer on-load tap-changer.
The instrument has a high degree of intelligence, full English menu prompts, and simple operation. The instrument is small in size, light in weight and strong in anti-interference ability, which greatly reduces the labor intensity of on-site staff. It is an ideal instrument for ensuring safe production and improving product quality in the power generation, power supply unit and transformer manufacturing industries.Model No.: PS-YC115
-
Push bdv tester oil analysis equipment dielectric strength tester for insulating oil
Insulating oil dielectric strength tester complies with astm d1816 astm d877 standard. It is testing all kinds of Insulation Oil’s Dielectric Strength Value.Our company has three different types of single-cup oil bdv tester, three-cup oil bdv tester and six-cup oil bdv tester.
Model No.: PS-1001
-
Insulation oil dielectric strength breakdown voltage tester
Insulating oil dielectric strength tester complies with astm d1816 astm d877 standard. It is testing all kinds of Insulation Oil’s Dielectric Strength Value.Our company has three different types of single-cup oil bdv tester, three-cup oil bdv tester and six-cup oil bdv tester.
Model No.: PS-1001、PS-1001B、PS-1001D
-
Very low frequency AC voltage Withstand tester
The product combines modern advanced digital variable frequency technology and micro computer control together, therefore, it can realize the full automatic voltage boost, stepdown, measurement and protection as well as the manual intervention in the process of automatic voltage boost. The full electronic design ensures the small size and light weight. The big LCD screen ensures the clear and visual display, and can display the output wave form. The printer outputs test reports.
Model No.: PS-vlf
-
Three phase transformer turns ratio meter tester ttr tester
The display adopts large screen dot matrix LCD with menu display function and simple and intuitive operation. Read the data directly and convert it automatically. Complete the three-phase voltage ratio or turn ratio test at one time, with fast test speed and high precision.
Model No.: PS-BB103
-
Push three phase transformer turns ratio meter tester price ttr tester
The display adopts large screen dot matrix LCD with menu display function and simple and intuitive operation. Read the data directly and convert it automatically. Complete the three-phase voltage ratio or turn ratio test at one time, with fast test speed and high precision.
Model No.: PS-BB103
-
Frequency conversion transformer tester ct pt tester
The device uses high-performance DSP and ARM, and advanced manufacturing technology to ensure stable and reliable product performance, complete functions, high automation, high test efficiency, and a leading level in the country. It is a professional testing instrument for transformers in the power industry.
Model No.: PS-CTPT1000
-
PS-YC115 On-load tap-changer tester
The instrument is mainly used to measure the transition waveform, transition time, transition resistance value of each moment, three-phase synchronicity of transformer on-load tap-changer, etc.
Model No.: PS-YC115
-
PS-3420 high voltage Insulation Resistance Tester
insulation resistance tester, also known as megohmmeter, high voltage megohmmeter, high voltage insulation resistance tester, etc., is specially used for insulation testing in laboratory or on-site.
Model No.: PS-3420
-
Push PS-2001A Oil Resistivity And Dielectric Loss Tester Insulating Oil Tangent Delta Test
Insulating oil dielectric loss tester /Oil tan delta tester is new generation of fully automatic portable insulating oil dielectric loss and resistivity meter designed according to ASTM D924 and GB/5654.It is used for measuring dielectric dissipation factor and DC resistivity of insulating oil and other insulating liquids. It is easy to operate with reliable and accurate test data.
Model No.: PS-2001A
-
Three Phase Secondary Current Injection Kit
The three-phase relay test bench can verify various relays (such as current, voltage, inverse time, power direction, impedance, differential, low cycle, synchronization, frequency, DC, intermediate, time, etc.) and microcomputer protection. Simulate various complex transient, permanent and conversion failures for the whole set of tests.
Model No.: PS-sc03
-
PS-YN1301 Kinematic Viscosity Tester
The Kinematic Viscometer Meets ASTM D 445 and is used to determine the kinematic viscosity of liquid petroleum products, including clear and opaque liquids, by measuring the volume of liquids flowing under gravity through a calibrated glass capillary viscometer.
Model No.: PS-YN1301
-
Automatic interface Surface tension tester du nouy ring oil Interfacial Tensiometer
The interfacial tensiometer is applicable to the GB/T6541 standard. The force between molecules forms the interfacial tension or surface tension of the liquid. The magnitude of the tension value can reflect the physical and chemical properties of the liquid and its material composition. It is one of the important indicators for the inspection of product quality in related industries. . PS-ZL203 is based on the ring method (platinum ring method), which measures the surface tension of various liquids (liquid-gas phase interface) and the interfacial tension of liquids (liquid-liquid phase interface).
Model No.: PS-ZL203
-
Push PS-2000A insulating oil Dielectric loss and volume resistivity tester oil tan delta tester
Insulating oil dielectric loss tester /Oil tan delta tester is new generation of fully automatic portable insulating oil dielectric loss and resistivity meter designed according to ASTM D924 and GB/5654.It is used for measuring dielectric dissipation factor and DC resistivity of insulating oil and other insulating liquids. It is easy to operate with reliable and accurate test data.
Model No.: PS-2000A
-
PS-8001 Gas Chromatograph Analyzer
Gas chromatographic analysis technique is an analysis of multicomponent mixture separation and analysis technology. It mainly uses the difference in boiling point and polarity of sample and in the chromatographic column adsorption coefficient, so that the various components in chromatographic column can be separated and analyzed qualitatively and quantitatively.
Model No.: PS-8001
-
PS-BB103B Three-phase Z transformer ttr turn ratio tester
Adopt 7-inch high-definition color touch screen, clear under strong light, with three-phase, single-item, 7 seconds to complete three tests, Z-type measurement function, clock and date display without power failure, U disk data storage function, equipped with U port and RS232, Red, yellow and green three-color binding posts, equipped with thermal printer, measuring range: 0.9-10000
Model No.: PS-BB103B
-
Transformer dielectric loss analysis tan delta tester
The dielectric loss tester adopts variable frequency power supply technology, single chip microcomputer and modern technology for automatic frequency conversion, analog-to-digital conversion and data operation; It has strong anti-interference ability, fast test speed, high precision, automatic digitization and simple operation; The power supply adopts high-power switching power supply, which can provide a maximum voltage of 10kV; It can automatically filter out 50Hz interference and is suitable for on-site test with large electromagnetic interference such as substation. It is widely used for dielectric loss measurement of transformers, mutual inductors, bushings, capacitors, arresters and other equipment in power industry.
Model No.: PS-JSB01
-
PS-BB104 Hand held portable ratio transformer TTR Turns Ratio Tester
With functions of turns ratio measurement and voltage TTR measurement.
With 5.6 inch LCD, the effect of data & figure display is visualized and fine.
With small size and light weight, it is easy to carry.
With built-in high capacity chargeable lithium battery. Test can be conducted without any power supply on site, and once the battery is charged fully, it can make measurement for more than 500 times continuously.
Model No.: PS-BB104
-
automatic fuel temperature analyzer distillation range tester
This instrument is used for determination of distillation range of petroleum products according to the test method in GB/T 6536, complying with ASTM D86 and IP123. This instrument will automatically control the heating process and distillation speed, as well as record and print all record data.
Model No.: PS-100Z
-
Contact Resistance Loop Resistance Tester
PS-HZ200 Contact Resistance Tester based on IEC Standard to design for high accurate and digital switches testing. The instrument adopts high frequency superpower constant current switch power source technology, can test micro ohm contact resistance. Wildly use in varies switch and electric appliance contact resistance test loop resistance test cable wires test weld contact resistance test.The machine has high accuracy and great stability, which can meet the requirement of electric power supplier department for high voltage switch maintaining and loop resistance tester.
Model No.: PS-HZ200
-
Automatic insulation oleic acid value analyzer
The transformer oil acidity tester adopts the extraction method, which can accurately detect the acid value of the insulating oil. It is a fully automatic measuring instrument. It takes single-chip microcomputer as the core and integrates multi-disciplinary technologies such as optics, mechanics, electricity, and chemistry. While the instrument improves efficiency and detection accuracy, it also reduces the operator’s contact with samples and reagents, making it safer
Model No.: PS2003、PS-2006
-
PS-DN4 Power quality analysis instrument
Power quality analyzer is a tester used to measure the AC power quality supplied by public power grid to users. This power quality analyzer has the advantages of large screen, mouse operation, built-in large capacity data storage and so on
Model No.: PS-DN4
-
Transformer DC Winding Resistance Tester
Transformer DC resistance tester. The instrument adopts a brand-new power supply technology, which has the characteristics of small size, light weight, large output current, good repeatability, strong anti-interference ability, and perfect protection functions. The whole machine is controlled by a high-speed single-chip microcomputer, with a high degree of automation, with automatic discharge and discharge alarm functions. The instrument has high test accuracy and simple operation, which can realize the rapid measurement of transformer direct resistance.
Model No.: PS-DC10A
-
Automatic Coulometric Karl Fischer Titrator
It is based on Karl Fischer Coulometric titration principle, accurate determination of liquids, solids, gases trace moisture ,used in the electricity, petroleum, chemical, pharmaceutical, food and other industries.
Model No.: PS-kf106
-
PS-ZD20T three-phase winding resistance tester three-channel DC resistance
DC resistance of transformer is the essential item to be tested in semi-finished product, finished product delivery test, installation, handover test and preventive test by electric power department, and is effective to help find manufacturing defects such as materials selection for transformer coil, welding, looseness on connection, strand breaking, wire breaking and so on, as well as hidden dangers after operation. To satisfy the requirement for quick measurement of DC resistance of transformer, our Company has developed PS-ZD20T three phase winding resistance tester aiming at YN connection winding. The tester can fulfill functions such as simultaneous energization on three phases, independent current sampling, voltage sampling, as well as simultaneous measurement and display of three-phase resistance value and three-phase unbalance rate, thus can significantly reduce test time for DC resistance of transformer, solve the problem of long test duration for DC resistance of each tapped winding of electric power transformer. It requires only 1/3 of the time required by traditional method.
Model No.: PS-ZD20T
-
PS-ZRD03 Lubricating Grease Cone Lubricity Oil Penetration Tester Penetrometer Astdm 217
This instrument is designed and manufactured according to the relevant provisions of the national standard GB/T269 “Determination of Penetration of Lubricating Grease and Petroleum Grease”, which is suitable for measuring the penetration of various lubricating greases and petroleum greases. It can also be equipped with relevant standard needles for the material test of solid fine particles, powder, or colloid, frozen body, etc. and the inspection of cheese, sugar gum, butter, butter, fermented body and other food raw materials.
This instrument is also suitable for ISO2137-85 “Determination of Penetration of Grease and Petroleum Grease”; ASTMD217-82, IP50-79 “Determination of Penetration of Grease”Model No.: PS-ZRD03
-
Oil Low Temperature Kinematic Viscosity Tester
This instrument is suitable for measuring the kinematic viscosity of liquid petroleum products. The instrument has the timing of the movement time of the sample and automatically calculates the final result of the kinematic viscosity. This method is suitable for determining the kinematic viscosity of liquid petroleum products (referring to Newtonian liquids), and its unit is m2/s, which is usually used in practice as mm2/s. Dynamic viscosity can be obtained by multiplying the measured kinematic viscosity by the density of the liquid.
-
PUSH oil breakdown voltage tester oil bdv tester astm d877 astm d1816
Insulating oil dielectric strength tester complies with astm d1816 astm d877 standard. It is testing all kinds of Insulation Oil’s Dielectric Strength Value.Our company has three different types of single-cup oil bdv tester, three-cup oil bdv tester and six-cup oil bdv tester.
Model No.: PS-1001D
-
Automatic lab test apparatus astm d97 oil pour point and cloud point tester
Functional characteristics
1) Integrated design, one slot two holes.
2)Refrigeration cycle system and temperature control system composed of imported totally enclosed compressor.
3)The cold tank adopts the patented technology of refrigeration and cold trap without alcohol, which has the advantages of fast cooling speed and long service life.
4)The imported PT100 temperature measurement system has high temperature control precision.
Model No.: PS-JY02
-
PS-BB101A Handheld three-phase transformation ratio tester
The power transformer shall be regularly tested for turns ratio or voltage ratio, including semi-finished products and finished products in the production process, transformers before putting into operation and during operation in the power system. The traditional transformation ratio bridge is cumbersome to operate, the reading is not intuitive, the necessary conversion is needed, and the test results only reflect a phase transformation ratio. The instrument overcomes the shortcomings of the traditional transformation ratio bridge test, completes the three-phase transformation ratio test at one time, has fast test speed and high accuracy, and greatly improves the test efficiency.
Model No.: PS-BB101A
-
ASTM D92 Full Automatic Cleveland Open Cup Flash Point Apparatus For Insulating Oil Tester
PS-KS403 Automatic flash tester is used to determine the opening flash point value of petroleum products. It adopts foreign advanced technology, uses touched screen replacing of typed keyboard, large LCD screen, without logo button prompts and so on. It is widely used in railway, aviation, electric power, oil industry and scientific research departments, etc.
Model No.: PS-KS403
-
PS-1001B Transformer dielectric strength tester Oil BDV Tester oil breakdown voltage tester dielectric analysis
PS-1001B Double-opening cover design, strong sealing, not easy to be affected by the outside world, suitable for outdoor testing, three-dimensional shape is convenient to carry, transport and store, follow astm d1816, astm d877, obtained CE certificate, intuitive reading, simple operation
Model No.: PS-1001B
-
Push Astm D93 Pensky Martens close Cup Flash Point Tester Flash Point Apparatus
PS-BS303A Automatic flash tester is used to determine the flash point value of petroleum products. It adopts foreign advanced technology, uses touched screen replacing of typed keyboard, large LCD screen, without logo button prompts and so on. It is widely used in railway, aviation, electric power, oil industry and scientific research departments, etc.
Model No.: PS-BS303A
-
push 80kv 60kv 30kv high voltage ac hv vlf hipot tester price vlf cable testing equipment vlf
The product combines modern advanced digital variable frequency technology and micro computer control together, therefore, it can realize the full automatic voltage boost, stepdown, measurement and protection as well as the manual intervention in the process of automatic voltage boost. The full electronic design ensures the small size and light weight. The big LCD screen ensures the clear and visual display, and can display the output wave form. The printer outputs test reports.
Model No.: PS-vlf
-
ASTM D92 Full Automatic Open Cup Flash Point Apparatus For Insulating Oil Tester Cleveland
PS-KS403 Automatic flash tester is used to determine the opening flash point value of petroleum products. It adopts foreign advanced technology, uses touched screen replacing of typed keyboard, large LCD screen, without logo button prompts and so on. It is widely used in railway, aviation, electric power, oil industry and scientific research departments, etc.
Model No.: PS-KS403
-
Automatic transformer lab test karl fischer titrator water content in oil tester
It is based on Karl Fischer Coulometric titration principle, accurate determination of liquids, solids, gases trace moisture ,used in the electricity, petroleum, chemical, pharmaceutical, food and other industries.
Model No.: PS-kf106
-
PS-ZD20 20A Transformer DC Winding Resistance Tester
Transformer DC resistance is a must-test item for semi-finished products, finished products factory test, installation, overhaul, change of tap changer, handover test and preventive test of power sector in transformer manufacturing. It can check the welding quality of the winding joint and whether the winding is short-circuited between turns. It can check whether the contact of each position of the voltage tap changer is good, whether the actual position of the tap changer is consistent with the indicated position, whether the lead wire is broken, and the multi-strand wires are wound in parallel. Whether there is a stock break, etc.
Model No.: PS-ZD20
-
PUSH 5kv 10kv 15kv Insulation Resistance Tester megger
PS-3520 adopts high-capacity rechargeable lithium battery pack. The instrument is equipped with test wires with double-layer insulation and shielding layers, and the high-voltage bar is equipped with replaceable alligator clips and hooks, which can be adapted to various test places. The instrument adopts a sturdy double-layer shell structure, and the protection level of the outer box of the instrument is IP65, which can prevent the intrusion of moisture and dust during transportation and storage and effectively protect the instrument from impact.
Model No.: PS-3520
-
PS-SD01 Oil Color Tester
This instrument is applicable to determine the color of various lubricating oils and other petroleum products according to SH / t0168-92 “colorimetric determination of petroleum products”. The determination method is to inject the sample of petroleum products to be determined into the colorimetric tube, and then compare it with the standard film to determine its color number. The color number indicated by this instrument is equivalent to that in GB / t6540
Model No.: PS-SD01
-
High voltage switch comprehensive characteristic tester
The switch features of this HA stand out: it is suitable for all types of SF6 switches, GIS combined appliances, vacuum switches, and oil switches produced at home and abroad.
The high-voltage switch mechanical characteristic tester can accurately measure the mechanical dynamic characteristic parameters of high-voltage circuit breakers of various voltage levels, such as low oil, high oil, vacuum, and sulfur hexafluoride. High-voltage circuit breakers are responsible for the dual tasks of control and protection in the power system, and their performance is directly related to the safe operation of the power system. The mechanical characteristic parameter is one of the important parameters to judge the performance of the circuit breaker.
Model No.: PS-CB101
-
PS-BB101A three-phase transformation turn ratio tester
The power transformer shall be regularly tested for turns ratio or voltage ratio, including semi-finished products and finished products in the production process, transformers before putting into operation and during operation in the power system. The traditional transformation ratio bridge is cumbersome to operate, the reading is not intuitive, the necessary conversion is needed, and the test results only reflect a phase transformation ratio. The instrument overcomes the shortcomings of the traditional transformation ratio bridge test, completes the three-phase transformation ratio test at one time, has fast test speed and high accuracy, and greatly improves the test efficiency.
Model No.: PS-BB101A
-
PUSH PS-DL10 Buy high Ac Large Current Generator Primary Current Injection price
PS-DL10 high current generator (referred to as current booster) adopts numerical control technology and has strong anti-interference ability. The converter made of iron core has the advantages of large output power, small size and light weight. Mainly used for thermal relay, motor protector, contactor, circuit breaker, air switch, switchgear, circuit breaker, protection screen calibration; used for primary busbar protection and the transformation ratio of various current transformers, etc. It is widely used in scientific research, production and electrical test sites of electric power, railway, petrochemical, metallurgy and mining enterprises.
Model No.: PS-DL10
-
PUSH insulation oil break down voltage oil bdv tester Product acessories
Sell insulating oil dielectric strength tester easy to wear product accessories, one-piece special plexiglass oil cup. Four kinds of electrode heads, two kinds of flat electrodes, spherical electrodes, hemispherical electrodes, in line with astm d1816 and astm d877, etc.
-
PS-ADX01 Automatic Lubricating Oil Oxidation Stability Tester
This instrument is designed and manufactured in accordance with Method B in the American Society for Testing and Materials (ASTM) D2272-2009 “Determination of Oxidative Stability of Lubricating Oils”, and is suitable for measuring the specified standard at 150°C or 140°C. Oxidative stability of oil.
Model No.: PS-ADX01
-
ps-101 Portable Eddy Current Resistivity Conductivity Tester
PS-101 is a kind of eddy current electrical conductivity tester, which is designed for quick & convenient measurement of material property, such as material separate、quality control、material state cFDk and so on. It uses the electromagnetism testing principle. Testing objects focus on non-ferromagnetic material.
Model No.: PS-101
-
PS-DD3D Fully automatic high-precision titrator
Application field: used for quality testing or scientific teaching in many industries such as medicine, food, geochemistry, petrochemical, daily chemical, agriculture, environmental protection, water treatment and so on.
Model No.: PS-DD3D
-
Fully automatic high-precision titrator
Application field: used for quality testing or scientific teaching in many industries such as medicine, food, geochemistry, petrochemical, daily chemical, agriculture, environmental protection, water treatment and so on.
Model No.: PS-DD600
-
PS-RC Resistor-capacitor potential shielding voltage divider type high-voltage measuring device
AC and DC high voltage divider
Mainly used for pulse high voltage, lightning high voltage, power frequency high voltage measurement. It has the characteristics of simple operation, intuitive display, high precision, small size, light weight, etc. It is suitable for power plants, substations, high-voltage electrical equipment manufacturers and high-voltage laboratories as an ideal equipment for high-voltage measurement.
Model No.: PS-RC
-
PS-mc2004 Multiple Pulse Cable Fault Tester
The system test consists of three parts: system host, fault locator and cable routing instrument. It is used to test various faults of power cables, cable routing, cable burial depth, and accurate testing of railway, airport signal control cables, and street light cable faults.
Model No.: PS-mc2004
-
33kV/50-8000kVA Transformer Microcomputer Comprehensive Test System
The test bench integrates multiple test functions of transformers. It can accurately measure the no-load loss, no-load current, load loss, impedance voltage, transformation ratio and group, winding DC resistance, power frequency external voltage withstand test, and induction withstand voltage test of the transformer.
-
Automatic Volumetric Karl Fischer Titration Karl Fischer moisture analyzer
PS-KF106V1 automatic fast Karl Fischer moisture analyzer is an automatic analytical instrument for measuring moisture content by Karl Fischer volumetric titration. The instrument is an ideal moisture detection instrument for production and scientific research.
Applicable standards: GB6238, GB11146, GB11133 and other 20 national standardsModel No.: PS-kf106
-
Push PS-KF106v Large color touch screen Volumetric karl fischer titration Powder/Gas Trace Moisture Tester
Adopt large-screen LCD liquid crystal display with touch screen, with rich software content, Chinese character prompts for operation content, flexible and convenient man-machine dialogue, storage and printing of test results and other functions
Model No.: PS-kf106V
-
High-voltage switch mechanical characteristic tester Circuit Breaker Tester
The high-voltage switch mechanical characteristic tester can accurately measure the mechanical dynamic characteristic parameters of high-voltage circuit breakers of various voltage levels, such as low oil, high oil, vacuum, and sulfur hexafluoride. High-voltage circuit breakers are responsible for the dual tasks of control and protection in the power system, and their performance is directly related to the safe operation of the power system. The mechanical characteristic parameter is one of the important parameters to judge the performance of the circuit breaker.
Model No.: PS-CB101
-
Secondary Current Injection Kit protection relay tester
The instrument has standard four phase voltage and three-phase current output (six phase voltage and six phase current output). It can not only test various traditional relays and protection devices, but also test various modern microcomputer protection, especially for transformer differential power protection and standby automatic switching device. The test is more convenient and perfect.
Model No.: PS-902/903、PS-1200、PS-802/1620/1630
-
ASTM D93 Automatic Pensky martens closed cup flash point apparatus tester
PS-BS303A Automatic flash tester is used to determine the flash point value of petroleum products. It adopts foreign advanced technology, uses touched screen replacing of typed keyboard, large LCD screen, without logo button prompts and so on. It is widely used in railway, aviation, electric power, oil industry and scientific research departments, etc.
Model No.: PS-BS303A
-
